Loading...

Venom

320.00390.00

Increased dimensions result in greater water displacement. This naturally results in increased stall requirements. This is exactly what the increased 25 degree blade angle completes with which we achieve a larger paytable radius. Thus we minimize the “dead” points resulting in the exploitation of full blade properties.

SKU: Venom Category:

Description

Venom

Venom blades are made of 100% Carbon with a weave combination (Twill 4X4, plain…) fabrics and top epoxy resins with advanced “UV” composition that confers yellowing resistance to conventional epoxy resins.
Laying the fabrics and placing them inside the blade plays a key role in its operation and performance.
The X-type layer positioning we have chosen to use gives us the advantage of graded hardness (as we climb to the tread the hardness and blade detonation increases to meet the proportionately increasing demands of the thimble) as well as lateral stiffness.

The combination of different weaving of fabrics gives us the advantage that our blade maintains its consistency and its exceptional characteristics (expansion, response, water displacement …) in each direction and direction of the user’s field.

Venom blades are mainly aimed at advanced divers looking for high performance in both the sea and swimming pool.

The innovation of the Venom blades is found on its overall structure and dimensions (19.5 cm width,87 cm length) the 25 degree angle and in combination with the fabric layout, we achieve maximum performance with less work.

Increased dimensions result in greater water displacement. This naturally results in increased stall requirements. This is exactly what the increased 25 degree blade angle completes with which we achieve a larger paytable radius. Thus we minimize the “dead” points resulting in the exploitation of full blade properties.

Venom blades are produced in 3 different choices
hardness.
Soft for free divers up to 75 kg
Medium for free divers 75-95 kg
Hard for free divers 95 kg and up
Of course, the above are suggested values, as the final choice of hardness depends on many factors, such as the free diver’s body, the technique of his foot, the use of the blade (long hours of swim, snorkeling etc.)

Technical data

Handmade high performance blades made of carbon fiber and top epoxy resins.
They are manufactured by the resin casting process under vacuum
(VIP – Vacuum Infusion Process)
With this method we achieve a uniform impregnation of fabrics with the right amount of resin required.
A very basic advantage of this method is to eliminate entrapped air bubbles in the blade. This gives us more durability of the blade.
Captured air bubbles play a catalytic role in blade strength as they break the fabric’s consistency resulting in cracking or even breaking in extreme conditions.
Impregnation with the ideal amount of resin gives us the advantage of low blade weight but also the full utilization of carbon fiber properties (Resistance to Tensile, Elasticity, Fracture Exacerbation) resulting in Resistance Explosiveness, Durability and Reliability.

Warranty: 2 years from date of production

Additional information

Dimensions 87 × 19.5 cm
Length

87 cm

Width

19,5 cm

Angle

25°

Weight

Soft 180gr, Medium 200gr, Hard 220gr

Warranty

2 years from the day of manufacturing